D-Link DWS-3160-24TC Reference Manual page 393

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
The fields that can be displayed are described below:
Parameter
Policy Name
Policy Type
Member Classes
Click the Member Classes hyperlink to see the detail information about the matched class.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Member Classes hyperlink, the following page will appear:
The fields that can be displayed are described below:
Parameter
Class Name
Class Type
Class Layer 3 Protocol
Match Criteria
Values
Click the <<Back button to return to the previous window.
Policy Attribute Summary
This window is use to display the differentiated service policy attribute.
To view this window, click Monitoring > QoS > Differentiated Services > Policy Attribute Summary as shown
below:
Figure 2-64 Policy Summary window
Description
The name of this policy.
The policy type.
List of all class names associated with this policy.
Figure 2-65 Policy Summary - Class Configuration window
Description
The name of this class.
A class type of All means every match criterion defined for the class is
evaluated simultaneously and must all be true to indicate a class match.
The Layer 3 protocol for this class. Possible values are IPv4 and IPv6.
The Match Criteria fields are only displayed if they have been configured. They
are displayed in the order entered by the user. The fields are evaluated in
accordance with the class type. The possible Match Criteria fields are:
Destination IP Address, Destination Layer 4 Port, Destination MAC Address,
Ethertype, Source MAC Address, VLAN, Class of Service, Any, IP DSCP, IP
Precedence, IP TOS, Protocol Keyword, Reference Class, Source IP Address,
and Source Layer 4 Port.
The values of the Match Criteria.
388