Session Table - D-Link DWS-3160-24TC Reference Manual

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
CLI Paging State
DHCP Auto
Configuration State
Power Saving State
Length Detection
State
Password Encryption
State
Running
Configuration
Click the Apply button to accept the changes made.
To learn more about the D-Link Green Technologies, go to

Session Table

Users can display the management sessions since the Switch was last rebooted.
To view the following window, click Management > Session Table, as show below:
Figure 6-13 Management Settings window
Description
Command Line Interface paging stops each page at the end of the console. This
allows you to stop the scrolling of multiple pages of text beyond the limits of the
console. CLI Paging is Enabled by default. To disable it, click the Disabled radio
button.
Enable or disable the Switch's DHCP auto configuration feature. When enabled, the
Switch is instructed to receive a configuration file from a TFTP server, which will set
the Switch to become a DHCP client automatically on boot-up. To employ this
method, the DHCP server must be set up to deliver the TFTP server IP address and
configuration file name information in the DHCP reply packet. The TFTP server must
be up and running and hold the necessary configuration file stored in its base
directory when the request is received from the Switch.
Enable or disable the link down power saving mode of each physical port. The switch
port will go into sleep mode when a port is not connected.
Enable or disable the length detection power saving mode on the physical ports. The
switch port will reduce the power feed for shorter cables.
Password encryption will encrypt the password configuration in configuration files.
Password encryption is Disabled by default. To enable password encryption, click the
Enabled radio button.
Under the Password Recovery option, the running configuration can be enabled or
disable. Being enabled, will allow the user to perform a password recovery of the
running configuration.
Figure 6-14 Session Table window
http://green.dlink.com/
31
for more details.