DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Port List
Type
Click the Find button to locate a specific entry based on the information entered.
Click the Clear button to clear all the information entered in the fields.
CFM Fault Table
This window is used to show the MEPs that have faults.
To view this window, click OAM > CFM > CFM Fault Table, as shown below:
The fields that can be configured are described below:
Parameter
MD Name
MD Index
MA Name
Figure 13-14 CFM Packet Counter Window
Description
Enter a list of ports to be displayed. Tick the All Ports check box to display all ports.
Transmit – Selecting this option will display all the CFM packets transmitted.
Receive – Selecting this option will display all the CFM packets received.
CCM – Selecting this option will display all the CFM packets transmitted and received.
Figure 13-15 CFM Fault Table Window
Description
Select and enter the Maintenance Domain name used.
Select and enter the Maintenance Domain index used.
Select and enter the Maintenance Association name used.
285