D-Link DWS-3160-24TC Reference Manual page 418

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
AP Failure Traps
AP State Change Traps
Client Failure Traps
Client State Change
Traps
Peer Switch Traps
RF Scan Traps
Rogue AP Traps
WIDS Status Traps
Wireless Status Traps
Click the Apply button to accept the changes made.
After clicking the Distributed Tunneling tab, the following page will appear:
Figure 3-23 Global SNMP Traps window
Description
Select Enable to allow the SNMP agent sending a trap if an AP fails to associate or
authenticate with the switch.
Select Enable to allow the SNMP agent sending a trap, when managed AP is
discovered, managed AP is failed, managed AP unknown protocol is discovered
and managed AP load balancing utilization is exceeded.
Select Enable to allow the SNMP agent sending a trap if a wireless client fails to
associate or authenticate with an AP that is managed by the switch.
Select Enable to allow the SNMP agent sending a trap when the wireless client
association, disassociation, or roam is detected.
Select Enable to allow the SNMP agent sending a trap when the peer switch is
discovered or failed, peer switch unknown protocol is discovered, or configuration
command is received from peer switch.
Select Enable to allow the SNMP agent sending a trap when the RF scan detects a
new AP, wireless client, or ad-hoc client.
Select Enable to allow the SNMP agent sending a trap when the switch discovers
a rogue AP.
Select Enable to allow the SNMP agent sending a trap when the switch has
become Cluster Controller, a rogue client is detected, rogue clients still exist after
rogue detected trap interval, or the maximum number of managed APs in the peer
group is exceeded.
Select Enable to allow the SNMP agent sending a trap if the operational status of
the Unified Switch changes, the Channel Algorithm or the Power Algorithm is
complete, or any of the following databases or lists has reached the maximum
number of entries: Managed AP database, AP Neighbor List, Client Neighbor List,
AP Authentication Failure List, RF Scan AP List, Client Association Database, Ad
Hoc Clients List and Detected Clients List.
413