D-Link DWS-3160-24TC Reference Manual page 252

Dws-3160 series web ui reference guide gigabit ethernet unified switch
Hide thumbs Also See for DWS-3160-24TC:
Table of Contents

Advertisement

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
The fields that can be configured or displayed are described below:
Parameter
CP Global State
CP Global
Operational Status
CP Global Disable
Reason
Additional HTTP Port
(0-65535)
Additional HTTP
Secure Port (0-65535)
Peer Switch Statistics
Reporting Interval
(15-3600)
Authentication
Timeout (60-600)
Click the Apply button to accept the changes made for each individual section.
CP Configuration
This window is used to create CP configuration.
To view this window, click Security > Captive Portal (CP) > CP Configuration as shown below:
Figure 11-67 Global Configuration window
Description
Click the radio buttons to enable or disable the CP global state.
Display the status of the CP operational status.
When captive portal is disabled, the field displays the reason being disabled.
Available reasons are: Administrator Disabled, IP Address Not Configured, No IP
Routing Interface and Routing Disabled.
Enter the additional HTTP port number between 0 and 65535, except 80 and 443. 80
is reserved for HTTP default port, and 443 is reserved for HTTPS default port. The
default value is 0 which represents that no additional port is used, and the default port
(80) is used.
Enter the additional HTTPS port number between 0 and 65535, except 80 and 443.
80 is reserved for HTTP default port, and 443 is reserved for HTTPS default port. The
default value is 0 which represents that no additional port is used, and the default port
(443) is used.
When clustering is supported on the switch, enter an interval that the peer switches
send its authenticated client statistics to the Cluster Controller periodically. The
reporting interval is in the range of 0, 15-3600 seconds. The value 0 means the
function is disabled. The default value is 120.
Enter a time for authentication. If a CP user does not enter valid credentials within the
time, the authentication page needs to be served again in order for the client to gain
access to the network. The value is between 60 and 600 seconds.
247

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dws-3160 seriesDws-3160-24pc

Table of Contents