D-Link DWS-3160-24TC Reference Manual page 451

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
After clicking the Add / Delete Rules button or the specific IPv6 ACL Name hyperlink, the following page will
appear:
Click the Add Rule button to create a new rule.
Click the <<Back button to return to the previous window.
Tick the check box and click the Delete button to remove the specific rule.
Click the Refresh button to update the list.
Click the Rule ID hyperlink or the Edit button to modify the specific rule.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Add Rule button, the following page appears:
The fields that can be configured are described below:
Parameter
Rule ID
Action
Match Every
Protocol
Figure 4-12 IPv6 Access Control Lists – Add / Delete Rules window
Figure 4-13 IPv6 Access Control Lists – Add Rule window
Description
Enter an ID for the rule.
Use the drop-down menu to select the ACL forwarding action when a packet
matches the rule's criteria.
Use the drop-down menu to select True or False. True means that all packets will
match the selected IPv6 ACL and Rule, and will be either permitted or denied.
When True is selected, the option of configuring other match criteria will not be
offered since all packets match the rule. To configure specific match criteria for the
rule, select False to configure the other match criteria.
Use the drop-down menu to select a packet's IP protocol to match condition for the
selected IP ACL rule. When selecting Other, the Protocol Value field appears.
Enter a value in the field.
446