Cfm Port Settings - D-Link DGS-3000 Series Reference Manual

The fields that can be configured are described below:
Parameter
State
Click the Apply button to accept the changes made.
Click the <<Back button to discard the changes made and return to the previous page.
After clicking the Remote MEP button, the following window will appear:
Click the <<Back button to discard the changes made and return to the previous page.

CFM Port Settings

This window is used to enable or disable the CFM function on a per-port basis.
To view this window, click OAM > CFM > CFM Port Settings as shown below:
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
Figure 10-10 CFM Extension LCK Settings Window
Description
Select to start or stop the management lock function.
Figure 10-11 CFM Extension LCK Settings Window
307