Mstp Port Information - D-Link DWS-3160-24TC Reference Manual

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
To view the following window, click L2 Features > Spanning Tree > STP Instance Settings, as show below:
The fields that can be configured are described below:
Parameter
MSTI ID
Priority
Click the Apply button to accept the changes made.
Click the Edit button to re-configure the specific entry.
Click the View button to display the information of the specific entry.

MSTP Port Information

This window displays the current MSTI configuration information and can be used to update the port configuration
for an MSTI ID. If a loop occurs, the MSTP function will use the port priority to select an interface to put into the
forwarding state. Set a higher priority value for interfaces to be selected for forwarding first. In instances where the
priority value is identical, the MSTP function will implement the lowest MAC address into the forwarding state and
other interfaces will be blocked. Remember that lower priority values mean higher priorities for forwarding packets.
To view the following window, click L2 Features > Spanning Tree > MSTP Port Information, as show below:
The fields that can be configured are described below:
Parameter
Port
Instance ID
Internal Path Cost
(1-200000000)
Figure 7-31STP Instance Settings window
Description
Enter the MSTI ID in this field. An entry of 0 denotes the CIST (default MSTI).
Enter the priority in this field. The available range of values is from 0 to 61440.
Figure 7-32 MSTP Port Information window
Description
Select the port you want to configure.
The MSTI ID of the instance to be configured. Enter a value between 0 and 15. An
entry of 0 in this field denotes the CIST (default MSTI).
This parameter is set to represent the relative cost of forwarding packets to specified
ports when an interface is selected within an STP instance. Selecting this parameter
with a value in the range of 1 to 200000000 will set the quickest route when a loop
78