DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
NOTE: The user must first globally enable Authentication Mode in the 802.1X Global Settings
window before initializing ports. Information in this window cannot be viewed before enabling
the authentication mode for either Port-based or MAC-based.
Initialize Port(s)
This window is used to display the authenticator diagnostics information. The window shows various information
based on the Authentication Mode configured in the 802.1X Global Settings window.
To view this window, click Security > 802.1X > Initialize Port(s) as shown below:
The fields that can be configured are described below:
Parameter
From Port / To Port
Click the Apply button to accept the changes made.
Figure 11-17 Authenticator Diagnostics window
Figure 11-18 Initialize P Port(s) – Port-based window
Description
Select a range of ports to be displayed.
204