D-Link DWS-3160-24TC Reference Manual page 346

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
The fields that can be displayed are described below:
Parameter
Total Entries
Peer IP Address
Configuration Switch IP
Address
Configuration
Timestamp
After clicking the Managed AP tab, the following page will appear:
Figure 2-10 Peer Switch – Configuration window
Description
Total number of entries displayed in the table below.
The IP address of each peer wireless switch in the cluster that received
configuration information.
The IP Address of the switch that sent the configuration information.
Display which parts of the configuration the switch received from the peer switch.
The possible configuration elements can be one or more of the following:
•
Global – Receive the basic and advanced global settings.
•
Discovery – Receive the L2 and L3 discovery information, including the VLAN
and IP list.
•
Channel/Power – Receive the RF management settings.
•
AP Database – Receive the AP database settings.
•
AP Profiles – Receive the AP profiles settings.
•
Known Client – Receive the known client database settings.
•
Captive Portal – Receive the captive portal information.
•
RADIUS Client – Receive the client RADIUS information.
•
QoS ACL – Receive the QoS access control lists settings.
•
QoS DiffServ – Receive the differentiated classes, services and policies.
If the switch has not received any configuration for another switch, the value is
None.
Display when the configuration was applied to the switch. The time is displayed as
UTC time and therefore only useful if the administrator has configured each peer
switch to use NTP.
341