DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
From Port / To Port
MAC Address
Click the Apply button to accept the changes made.
NOTE: The user must first globally enable Authentication Mode in the 802.1X Global Settings
window before initializing ports. Information in this window cannot be viewed before enabling
the authentication mode for either Port-based or MAC-based.
Reauthenticate Port(s)
This window is used to display the current status of the re-authenticated port-based port(s). The window shows
various information based on the Authentication Mode configured in the 802.1X Global Settings window.
To view this window, click Security > 802.1X > Reauthenticate Port(s) as shown below:
The fields that can be configured are described below:
Parameter
From Port / To Port
Click the Apply button to accept the changes made.
The fields that can be configured are described below:
Parameter
From Port / To Port
MAC Address
Click the Apply button to accept the changes made.
Figure 11-19 Initialize Port(s) – MAC-based window
Description
Select a range of ports to be displayed.
Tick the check box and enter the authenticated MAC address of the client
connected to the corresponding port.
Figure 11-20 Reauthenticate Port(s) – Port-based window
Description
Select a range of ports to be displayed.
Figure 11-21 Reauthentiate Port(s) – MAC-based window
Description
Select a range of ports to be displayed.
Tick the check box and enter the authenticated MAC address of the client
connected to the corresponding port.
205