D-Link DWS-3160-24TC Reference Manual page 457

Dws-3160 series web ui reference guide gigabit ethernet unified switch
Hide thumbs Also See for DWS-3160-24TC:
Table of Contents

Advertisement

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Class Name
Class Type
Class Layer 3 Protocol
Click the Add button to add a new entry based on the information entered.
Click the Edit Class to configure the entry.
Click the Rename Class button to change the name of the specific class.
Click the Delete Class to remove the entry from the list.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Edit Class button, the following page appears:
The fields that can be configured are described below:
Parameter
Class Match Selector
Figure 4-21 Class Configuration window
Description
Enter a class name.
Select the class type.
Select the class layer 3 protocol as IPv4 or IPv6.
Figure 4-22 Class Configuration – Edit Class window
Description
Use the drop-down menu to select match criteria to a specified class. Click the Add
Match Criteria button to see the criteria configuration for that class.
When Class Layer 3 Protocol is IPv4, the following selections display in the drop-
down menu.
Class of Service – Select this and select a value (between 0 and 7) of Class of
Service in the next window.
Destination IP Address – Select this to enter an IP address and its mask in the next
window. A packet's destination IP address must match the address entered.
Destination Layer4 Port – Select this to choose protocol keyword in the next
window. A packet's TCP/UDP destination port must match the selected port. Select
Other to enter a user-defined Port ID in the Protocol Value field by which packets
are matched to the rule.
Destination MAC Address – Select this to enter a MAC address and its mask in the
next window. A packet's destination MAC address must match the address
entered.
Ethertype – Select this to choose the Ethertype Key in the next window. A frames'
Ethertype must match the selected Ethertype. Select User Value to enter a user-
defined Ethertype Value in the field.
452

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dws-3160 seriesDws-3160-24pc

Table of Contents