Chapter 10 Monitoring; Utilization - D-Link DWS-3160-24TC Reference Manual

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide

Chapter 10 Monitoring

Utilization

Statistics
Mirror
sFlow
Ping Test
Trace Route
Peripheral
Utilization
CPU Utilization
Users can display the percentage of the CPU being used, expressed as an integer percentage and calculated as a
simple average by time interval.
To view this window, click Monitoring > Utilization > CPU Utilization as shown below:
The fields that can be configured are described below:
Parameter
Time Interval
Record Number
Show/Hide
Click the Apply button to accept the changes made.
DRAM & Flash Utilization
On this page the user can view information regarding the DRAM and Flash utilization.
To view this window, click Monitoring > Utilization > DRAM & Flash Utilization as shown below:
Figure 14-1 CPU Utilization window
Description
Select the desired setting between 1s and 60s, where "s" stands for seconds. The
default value is one second.
Select number of times the Switch will be polled between 20 and 200. The default
value is 200.
Check whether or not to display Five Seconds, One Minute, and Five Minutes.
292