D-Link DWS-3160-24TC Reference Manual page 381

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
Noise
Probe Req Recorded
Probe Collection Interval
Highest Probes Detected
Channel
OUI Description
Auth Msgs Recorded
Auth Collection Interval
Highest Auth Msgs
De-Auth Msgs Recorded
De-Auth Collection Interval
Highest De-Authe msgs
Authentication Failures
Probes Detected
Broadcast BSSID Probes
Broadcast SSID Probes
Specific BSSID Probes
Specific SSID Probes
Last Non-Broadcast BSSID
Last Non-Broadcast SSID
Threat Mitigation Sent
Click the Acknowledge Rogue button to clear the rogue status of the client.
After clicking the WIDS Client Rogue Classification tab under the Detected Client Summary tab, the following
page will appear:
authenticated. The possible range is from -128 to 128 dBm.
Last channel noise reported by the managed AP with which the client is
authenticated. The possible range is from -128 to 128 dBm.
Number of probe requests recorded so far during the probe collection interval.
Display the amount of time spent in each probe collection period. The probe
collection helps the switch decide whether the client is a threat.
Display the largest number of probes that the switch detected during a probe
collection interval.
Display the channel that the client is using.
Display the organization unique identifier for the wireless client.
Display the number of IEEE 802.11 Authentication messages recorded so far
during the authentication collection interval.
Display the amount of time spent in each authentication collection period. The
authentication collection helps the switch decide whether the client is a threat.
Display the largest number of authentication messages that the switch detected
during an authentication collection interval.
Display the number of IEEE 802.11 De-Authentication messages recorded so
far during the de-authentication collection interval.
Display the amount of time spent in each de-authentication collection period.
The de-authentication collection helps the switch decide whether the client is a
threat.
Display the largest number of de-authentication messages that the switch
detected during a de-authentication collection interval.
Display the number of 802.1X Authentication failures detected for this client.
Display the number of probes detected in the last RF Scan.
Display the number of probes to broadcast BSSID in the last RF Scan.
Display the number of probes to broadcast SSID in the last RF Scan.
Display the number of probes to a specific BSSID in the last RF Scan.
Display the number of probes to a specific SSID in the last RF Scan.
Display the last non-broadcast BSSID detected in the RF Scan, which is a MAC
address.
Display the name of the last non-broadcast SSID detected in the RF Scan.
Display whether threat mitigation has been done for this client.
376