D-Link DWS-3160-24TC Reference Manual page 428

Dws-3160 series web ui reference guide gigabit ethernet unified switch
Hide thumbs Also See for DWS-3160-24TC:
Table of Contents

Advertisement

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
Long Retries
Transmit Lifetime
(msecs)
Receive Lifetime
(msecs)
Station Isolation
Primary Channel
Short Guard Interval
Multicast Tx Rate
(Mbps)
Supported Channels
Auto Eligible
Available MCS Indices
Rate Sets (Mbps)
Basic
Supported
Click the Apply button to accept the changes made.
Click the Clear button to discard the changes made and return to the default settings.
After clicking the VAP tab under the Profile Name tab, the following page will appear:
equal to the RTS Threshold.
Display the maximum number of transmission attempts on frame sizes greater than
the RTS Threshold.
Display the number of milliseconds to wait before terminating attempts to transmit
the MSDU after the initial transmission.
Display the number of milliseconds to wait before terminating attempts to
reassemble the MMPDU or MSDU after the initial reception of a fragmented
MMPDU or MSDU.
Tick the check box to allow the AP blocking communication between wireless
clients.
Use the drop-down menu to set the Primary Channel as the Upper or Lower 20-
MHz channel in the 40-MHz band. This option only available when the Channel
Bandwidth is configured as 40MHz.
Select to enable or disable the short guard interval when operating in 802.11n
mode.
Select the 802.11 rate at which the radio transmits multicast frames.
Display the channels supported for the radio mode. The available channels vary
based on the selected Country Code in the Basic Setup Global window.
Tick the check boxes beneath each channel to include the channel in the automatic
channel assignment process.
Tick the check boxes to add MCS Index when operating in 802.11n mode.
Display the transmission rate sets.
Tick the check boxes to indicate the data rates that all stations associating with the
AP must support.
Tick the check boxes to indicate rates that the access point supports. The AP
automatically chooses the most efficient rate based on factors like error rates and
distance of client stations from the AP.
423

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dws-3160 seriesDws-3160-24pc

Table of Contents