D-Link DWS-3160-24TC Reference Manual page 353

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
Channel
Transmit Power
Authenticated Clients
Click the MAC Address or Radio hyperlinks to see the detail information about the radio.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Radio Detail tab under the Status tab, the following page will appear:
Use the drop-down menu to select the MAC address of the AP and click the radio type to see the detail information.
The fields that can be displayed are described below:
Parameter
Supported Channels
Channel
Channel Bandwidth
Fixed Channel Indicator
Manual Channel
Adjustment Status
WLAN Utilization
The current operating channel for the radio.
The current transmit power for the radio.
Total count of clients authenticated by the AP on the physical radio. This is a sum
of all the clients authenticated by each VAP enabled on the radio.
Figure 2-16 Managed AP Status – Radio Detail window
Description
The list of eligible channels the AP reported to the switch for channel assignment.
The list is based on country code, hardware capabilities, and any configured
channel limitations.
The current operating channel for the radio.
Display whether the channel bandwidth is 20 MHz or 40 MHz.
This flag indicates if a fixed channel is configured and assigned to the radio, a fixed
channel can be configured in the valid AP database (locally or on a RADIUS
server).
The current state of a manual request to change the channel on this radio. The
valid values are:
•
Not Started - No request has been made to change the channel.
•
Requested - A channel change has been requested by the user but has not
been processed by the switch.
•
In Progress - The switch is processing a channel change request for this radio.
•
Success - A channel change request is complete.
•
Failure - A channel change request failed.
Total network utilization for the physical radio. This value is based on radio
348