D-Link DWS-3160-24TC Reference Manual page 380

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
After clicking the MAC address hyperlink, the following page will appear:
The fields that can be displayed are described below:
Parameter
MAC address
Client Status
Authentication Status
Threat Detection
Threat Mitigation Status
Time Since Entry Last
Updated
Time Since entry Create
Client Name
RSSI
Signal
Figure 2-47 Detected Client Summary –Detected Client Status window
Description
The Ethernet address of the client.
Display the client status, which can be one of the following:
•
Authenticated - Client is Authenticated with the system and is not Rogue.
•
Detected - Client is detected, not Authenticated, not rogue, and is not found
in the Known Clients Database.
•
Known - Client is detected and found in the Known Clients Database, but is
not authenticated.
•
Black-Listed - Client tried to associate with the system, but was rejected due
to MAC authentication.
•
Rogue - Client failed of the enabled threat tests.
Display whether this client is authenticated.
NOTE: The Client Status can be Rogue, but the authentication status can still
be Authenticated.
Display whether one of the threat detection tests has been triggered for this
client. If the test is disabled, the client will not be marked as a rogue, but you
can still investigate why the threat was triggered.
Display whether threat mitigation has been done for this client.
Display the amount of time that has passed since any event has been received
for this client that updated the detected client database entry.
Display the amount of time that has passed since this entry was first added to
the detected clients database.
Display the name of the client, if available, from the Known Client Database. If
the client is not in the database, the field is blank.
If the client is authenticated with the managed AP, this field displays the last
RSSI value reported by the AP with which the client is authenticated. The RSSI
is a percentage from 1 to 100%. A value of 0 means the AP is not detected.
Last signal strength reported by the managed AP with which the client is
375