Port Group Settings; Time Settings - D-Link DWS-3160-24TC Reference Manual

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
Weekdays Use the check boxes to select the corresponding days of the week that this time range is to
be enabled. Tick the Select All Days check box to configure this time range for every day of
the week.
Click the Apply button to accept the changes made. Current configured entries will be displayed in the Time
Range Information table in the bottom half of the window shown above.

Port Group Settings

This window is used to create port groups, and add or delete ports from the port groups.
To view the following window, click System Configuration > Port Group Settings, as show below:
The fields that can be configured are described below:
Parameter
Group Name
Group ID (1-64)
Port List
Action
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.

Time Settings

Users can configure the time settings for the Switch.
To view the following window, click System Configuration > Time Settings, as show below:
The fields that can be configured are described below:
Parameter
Date (DD/MM/YYYY)
Time (HH:MM:SS)
Click the Apply button to accept the changes made.
Figure 5-17 Port Group Settings window
Description
Enter the name of a port group.
Enter the ID of a port group
Enter a port or list of ports. Tick the All check box to apply to all ports.
Use the drop-down menu to select Create Port Group, Add Ports or Delete Ports.
Figure 5-18 Time Settings window
Description
Enter the current day, month, and year to update the system clock.
Enter the current time in hours, minutes, and seconds.
19