D-Link DWS-3160-24TC Reference Manual page 213

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
The user may also select the desired time interval to update the statistics, between 1s and 60s, where "s" stands
for seconds. The default value is one second.
The fields that can be configured are described below:
Parameter
InvalidServerAddr
Identifier
ServerIndex
AuthServerAddr
ServerPortNumber
RoundTripTime
AccessRequests
AccessRetrans
AccessAccepts
AccessRejects
AccessChallenges
Figure 11-24 RAIUS Authentication window
Description
The number of RADIUS Access-Response packets received from unknown
addresses.
The NAS-Identifier of the RADIUS authentication client.
The identification number assigned to each RADIUS Authentication server that the
client shares a secret with.
The (conceptual) table listing the RADIUS authentication servers with which the
client shares a secret.
The UDP port the client is using to send requests to this server.
The time interval (in hundredths of a second) between the most recent Access-
Reply/Access-Challenge and the Access-Request that matched it from this RADIUS
authentication server.
The number of RADIUS Access-Request packets sent to this server. This does not
include retransmissions.
The number of RADIUS Access-Request packets retransmitted to this RADIUS
authentication server.
The number of RADIUS Access-Accept packets (valid or invalid) received from this
server.
The number of RADIUS Access-Reject packets (valid or invalid) received from this
server.
The number of RADIUS Access-Challenge packets (valid or invalid) received from
208