D-Link DWS-3160-24TC Reference Manual page 337

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
Cluster Controller IP
Address
Total Access Points
Managed Access Points
Standalone Access
Points
Rogue Access Points
Discovered Access
Points
Connection Failed
Access Points
Authentication Failed
Access Points
Unknown Access
Points
Rogue AP Mitigation
Limit
Rogue AP Mitigation
Count
Maximum Managed APs
in Peer Group
WLAN Utilization
Total Clients
Authenticated Clients
802.11a Clients
802.11b/g Clients
802.11n Clients
Maximum Associated
Clients
Detected Clients
Maximum Detected
Clients
Maximum Pre-
authentication History
Entries
are not Cluster Controllers can display information only about locally
attached devices.
The IP address of the peer switch that is the Cluster Controller.
Total number of Managed APs in the database. This value is always equal to the
sum of Managed Access Points, Connection Failed Access Points, and Discovered
Access Points.
Number of APs in the managed AP database that are authenticated, configured,
and have an active connection with the Unified Switch.
Number of trusted APs in Standalone mode. APs in Standalone mode are not
managed by a switch.
Number of Rogue APs currently detected on the WLAN. When an AP performs an
RF scan, it might detect access points that have not been validated. It reports these
APs as rogues.
APs that have a connection with the switch, but haven't been completely
configured. This value includes all managed APs with a Discovered or
Authenticated status.
Number of APs that were previously authenticated and managed, but currently
don't have connection with the Unified Switch.
Number of APs that failed to establish communication with the Unified Switch.
Number of Unknown APs currently detected on the WLAN. If an AP configured to
be managed by the Unified Switch is detected through an RF scan at any time that
it is not actively managed it is classified as an Unknown AP.
Maximum number of APs for which the system can send de-authentication frames.
Number of APs to which the wireless system is currently sending de-authentication
messages to mitigate against rogue APs. A value of 0 indicates that mitigation is
not in progress.
Maximum number of access points that can be managed by the cluster.
Total network utilization across all APs managed by this switch. This is based on
global statistics.
Total number of clients in the database. This total includes clients with an
Associated, Authenticated, or Disassociated status.
Total number of clients in the associated client database with an Authenticated
status.
Total number of IEEE 802.11a only clients that are authenticated.
Total number of IEEE 802.11b/g only clients that are authenticated.
Total number of clients that are IEEE 802.11n capable and are authenticated.
These include IEEE 802.11a/n, IEEE 802.11b/g/n, 5 GHz IEEE 802.11n, 2.4GHz
IEEE 802.11n.
Maximum number of clients that can associate with the wireless system. This is the
maximum number of entries allowed in the Associated Client database.
Number of wireless clients detected in the WLAN.
Maximum number of clients that can be detected by the switch. The number is
limited by the size of the Detected Client Database.
Maximum number of Client Pre-Authentication events that can be recorded by the
system.
332