Vrrp Global Settings; Vrrp Virtual Router Settings - D-Link DWS-3160-24TC Reference Manual

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide

VRRP Global Settings

This window is used to configure the VRRP Global settings.
To view the following window, click L3 Features > VRRP > VRRP Global Settings, as show below:
The fields that can be configured are described below:
Parameter
VRRP State
Non-owner
response Ping
Click the Apply button to accept the changes made.

VRRP Virtual Router Settings

This window is used to configure VRRP virtual router settings.
To view the following window, click L3 Features > VRRP > VRRP Virtual Router Settings, as show below:
The fields that can be configured are described below:
Parameter
Interface Name
VRID (1-255)
IP Address
State
Priority (1-254)
Advertisement
Figure 8-5 VRRP Global Settings window
Description
Use the drop-down menu to enable or disable the VRRP state.
Specify that the virtual IP address is allowed to be pinged from other host end nodes to
verify connectivity.
Figure 8-6 VRRP Virtual Router Settings window
Description
Enter the IP interface name used to create a VRRP entry.
Enter the ID of the virtual router. All the routers participating in this group must be
assigned the same VRID value. This value must be different from other VRRP groups
set on the Switch.
Enter the virtual router's IP address. This IP address is also the default gateway that
will be statically assigned to end hosts and must be set for all routers that participate in
this group.
Use the drop-down menu to enable or disable the state of the virtual router function of
the interface.
Enter the priority to be used for the Virtual Router Master election process. The VRRP
Priority value may determine if a higher priority VRRP router overrides a lower priority
VRRP router. A higher priority increases the possibility to become the Master router of
the group. A lower priority increases the possibility to become the backup router. For
VRRP routers with the same priority value, the VRRP router with the highest physical
IP address is chosen to be the Master router.
Enter the interval between sending advertisement messages.
129