D-Link DWS-3160-24TC Reference Manual page 371

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
Location
Radio
VLAN
Transmit Data Rate
Network Time
STBC Capable
Detected IP Address
Click the drop-down menu to select a MAC address of the client to view detailed status information about the client
and its association with the access point.
Click the Disassociate to disassociate the client from the managed AP.
After clicking the Client QoS tab under the Status tab, the following page will appear:
Click the drop-down menu to select the MAC address of the client with the information to view.
The fields that can be displayed are described below:
Parameter
Actual / RADIUS
Client QoS
Operational Status
Bandwidth Limit Down
is associated.
The descriptive location configured for the managed AP.
Display the managed AP radio interface the client is associated to and its configured
mode.
If the client is on a VAP using VLAN data forwarding mode, the current assigned
VLAN is displayed.
Display the rate at which the client station is currently transmitting data.
Display the amount of time that has passed since this client first authenticated with
the network.
Display the Space Time Block Code (STBC) mode of the client.
Display the IPv4 address of the client.
Figure 2-36 Associated Clients Status - Client QoS window
Description
Click the Actual radio button to display either the actual status parameters
configured on the AP. Click the RADIUS radio button to display any client QoS
parameters that were obtained for the client from a RADIUS server when using
802.1X authentication.
Display whether QoS is enforced for the client.
Display the maximum rate at which the client receives traffic from the AP in bits per
second.
The rate shown in this field is the configured value rounded down to the nearest 64
366