D-Link DWS-3160-24TC Reference Manual page 286

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
State
Period
Level
Click the Apply button to accept the changes made.
Click the <<Back button to discard the changes made and return to the previous window.
After click the Edit LCK button, the following window will appear:
The fields that can be configured are described below:
Parameter
State
Period
Level
Click the Apply button to accept the changes made.
Click the <<Back button to discard the changes made and return to the previous window.
Figure 13-8 CFM Extension AIS Window
Description
Specifies to enable or disable the AIS function.
The transmitting interval of AIS PDU. The default period is 1 second. Options to choose
from are:
1sec - Specifies that the transmitting interval will be set to 1 second.
1min - Specifies that the transmitting interval will be set to 1 minute.
The client level ID to which the MEP sends AIS PDU. The default client MD level is MD
level at which the most immediate client layer MIPs and MEPs exist. Options to choose
from are values between 0-7.
Figure 13-9 CFM Extension LCK Settings Window
Description
Specifies to enable or disable the LCK function.
The transmitting interval of LCK PDU. The default period is 1 second. Options to
choose from are:
1sec - Specifies that the transmitting interval will be set to 1 second.
1min - Specifies that the transmitting interval will be set to 1 minute.
The client level ID to which the MEP sends LCK PDU. The default client MD level is
MD level at which the most immediate client layer MIPs and MEPs exist. Options to
choose from are values between 0-7.
281