D-Link DWS-3160-24TC Reference Manual page 34

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
VLAN Name
Interface Admin State
Secondary Interface
Click the Apply button to accept the changes made.
Click the <<Back button to discard the changes made and return to the previous window.
Click the IPv4 Edit button to see the following window.
The fields that can be configured are described below:
Parameter
Get IP From
Interface Name
IPv4 Address
Subnet Mask
VLAN Name
IPv4 State
Interface Admin State
Click the Apply button to accept the changes made.
Click the <<Back button to discard the changes made and return to the previous window.
Click the IPv6 Edit button to see the following window.
The fields that can be configured or displayed are described below:
Enter the VLAN Name used.
Use the drop-down menu to enable or disable the Interface Admin State.
Tick the check box to use this Interface as a Secondary Interface. When the primary
IP is not available, the VLAN will switch to the secondary interface. It will switch back
when the primary IP was recovered.
Figure 6-10 IPv4 Interface Settings – Edit window
Description
Use the drop-down menu to specify the method that this Interface uses to acquire an
IP address.
Enter the name of the IP interface being configured.
Enter the IPv4 address used.
Enter the IPv4 subnet mask used.
Enter the VLAN Name used.
Use the drop-down menu to enable or disable IPv4 State.
Use the drop-down menu to enable or disable the Interface Admin State.
Figure 6-11 IPv6 Interface Settings window
29