DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
Figure 2-48 Detected Client Summary –WIDS Client Rogue Classification window
The fields that can be displayed are described below:
Parameter
MAC Address
Test Description
Condition Detection
Reporting MAC Address
Radio
Test Config
Test Result
Time Since First Report
Time Since Last Report
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Pre-Auth History tab under the Detected Client Summary tab, the following page will appear:
Description
The Ethernet MAC address of the detected wireless client.
Display the tests that were performed, which includes the following:
•
Known Clients database Test
•
Client exceeds configured rate for auth msgs
•
Client exceeds configured reate for probe msgs
•
Client exceeds configured rate for de-auth msgs
•
Client exceeds max failing authentications
•
Known client authenticated with unknown AP
•
Client OUI not in the OUI Database
Display whether the result of the test was true or false.
Display the MAC address of the AP that reported the test results.
Display which physical radio on the reporting AP was responsible for the test
results.
Display whether this test is configured to report rogues. Each test can be
globally enabled or disabled to report a positive result as a rogue.
Display whether this test reported the device as rogue. In some cases the test
may report a positive result, be enabled, but not report the device as rogue
because the device is allowed to operate in this mode.
Time stamp indicating how long ago this test first detected the condition.
Time stamp indicating how long ago this test last detected the condition.
377