D-Link DWS-3160-24TC Reference Manual page 453

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
Source Prefix
Source Prefix Mask
Source L4 Port
Destination Prefix
Destination Prefix Mask
Destination L4 Port
Flow Label
IP DSCP Service
Click the Apply button to accept the changes made.
Click the Cancel button to discard the configuration.
MAC Access Control Lists
This window is used to configure MAC access control lists.
To view this window, click QoS > Access Control Lists > MAC Access Control Lists as shown below:
The fields that can be configured are described below:
Parameter
MAC ACL Name
Click the Add button to add a new entry based on the information entered.
Click the Rename ACL button to change the name of the specific ACL.
Click the Add / Delete Rules to configure the ACL rules.
Click the Delete ACL to remove the entry from the list.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Rename ACL button, the following page will appear:
Tick the check box and enter an IPv6 prefix and a packet's source IPv6 prefix must
match the address entered.
Enter the source IPv6 mask, when the Source Prefix check box is selected.
Tick the check box and use the drop-down menu to select L4 keyword of source
ports to match a packet's TCP/UDP source port. When selecting Other, the
Source Port Value field appears. Enter a value in the field.
Tick the check box and enter an IPv6 prefix and a packet's destination IPv6 prefix
must match the address entered.
Enter the destination IPv6 mask, when the Destination Prefix check box is selected.
Tick the check box and use the drop-down menu to select L4 keyword of
destination ports to match a packet's TCP/UDP destination port. When selecting
Other, Destination Port Value appears. Enter a value in the field.
Tick the check box and enter a value of IPv6 flow label.
Tick the check box and select one of the DSCP keyword values from the IP DSCP
drop-down menu. When selecting Other, the IP DSCP Value field appears. Enter a
value in the field.
Figure 4-15 MAC Access Control Lists window
Description
Enter the ID or name of the MAC ACL.
448