D-Link DWS-3160-24TC Reference Manual page 500

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
Tunnel-Type (64)
Tunnel-Medium-Type (65)
Tunnel-Private-Group-ID
(81)
If the global MAC Authentication action is configured as "White List", then any wireless clients with MAC addresses
that are specified in the list, and are not explicitly denied access, are granted access. If MAC address is not in the
list, then the access to the client is denied.
If the global MAC Authentication action is configured as "Black List", then any wireless clients with MAC addresses
that are specified in the list, and are not explicitly granted access, are denied access. If MAC address is not in the
list, then the access to the client is granted.
Captive Portal RADIUS Attributes
The following table indicates the RADIUS attributes that are used to configure Captive Portal users. The table
indicates both RADIUS attributes and vendor specific attributes (VSA) that are used to configure Captive Portal.
Attribute
User-Name (1)
User-Password (2)
Session-Timeout (27)
Idle-Timeout (28)
Vendor-Specific (26),
WISPr (14122),
WISPr-Bandwidth-Max-
Down (8)
Vendor-Specific (26),
WISPr (14122),
WISPr-Bandwidth-Max-Up
(7)
Vendor-Specific (26),
D-Link (171),
LVL7-Max-Input-Octets
For dynamic VLAN
usage.
For dynamic VLAN
usage.
For dynamic VLAN
usage.
Description
User name to be
authorized
User password
Logout once session
timeout is reached
(seconds). If the attribute
is 0 or not present, then
use the value configured
for the Captive Portal.
Logout once idle timeout
is reached (seconds). If
the attribute is 0 or not
present, then use the
value configured for the
Captive Portal.
Maximum client receive
rate (b/s). Limits the
bandwidth at which the
client can receive data
from the network. If the
attribute is 0 or not
present, then use the
value configured for the
Captive Portal.
Maximum client transmit
rate (b/s). Limits the
bandwidth at which the
client can send data into
the network. If the
attribute is 0 or not
present, then use the
value configured for the
Captive Portal.
Maximum number of
octets the user is allowed
to transmit. After this limit
495
VLAN (13)
802
VLANID
Range
1-32 characters
8-64 characters
Integer (seconds)
Integer (seconds)
Integer
Integer
Integer
Optional
Optional
Optional
Usage Default
Required None
Required None
Optional 86400
Optional 0
Optional 0
Optional 0
Optional 0