D-Link DWS-3160-24TC Reference Manual page 435

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
After clicking the Configuration Enable/Disable tab, the following page will appear:
The fields that can be configured are described below:
Parameter
Global
Discovery
Channel/Power
AP Database
AP Profile
Known Client
Captive Portal
RADIUS Client
QoS ACL
QoS DiffServ
Click the Apply button to accept the changes made.
After clicking the Mutual Authentication tab, the following page will appear:
Figure 3-34 Peer Switch Configuration Enable/Disable window
Description
Select Enabled to include the basic and advanced global settings in the configuration that
the switch pushes to its peers.
Select Enabled to include the L2 and L3 discovery information, including the VLAN list
and IP list, in the configuration that the switch pushes to its peers.
Select Enabled to include the RF management information in the configuration that the
switch pushes to its peers.
Select Enabled to include the AP Database in the configuration that the switch pushes to
its peers.
Select Enabled to include all AP profiles in the configuration that the switch pushes to its
peers.
Select Enabled to include the Known Client Database in the configuration that the switch
pushes to its peers.
Select Enabled to include the Captive Portal information in the configuration that the
switch pushes to its peers.
Select Enabled to include the Client RADIUS information in the configuration that the
switch pushes to its peers.
Select Enabled to include the QoS ACLs in the configuration that the switch pushes to its
peers.
Select Enabled to include the Diffserv classes, services, and policies in the configuration
that the switch pushes to its peers.
430