D-Link DWS-3160-24TC Reference Manual page 414

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Password
Confirm Password
Enable Debug
Click the <<Back button to discard the changes made and return to the previous window.
Click the Apply button to accept the changes made.
After clicking the Channel or Power hyperlink, the following page will appear:
The fields that can be configured are described below:
Parameter
Channel
Power
Click the <<Back button to discard the changes made and return to the previous window.
Click the Apply button to accept the changes made.
AP Provisioning
This window is used to configure access point provisioning.
To view this window, click Administration > AP Management > AP Provisioning as shown below:
Figure 3-18 Advanced Settings – Debug window
Description
Enter the admin password for the AP.
Retype the password to confirm.
Click to enable or disable debugging.
Figure 3-19 Advanced Settings – Channel/Power window
Description
Use the drop-down menu to define the portion of the radio spectrum that the radio uses
for transmitting and receiving.
Enter a number in percentage to set the power level which affects how far an AP
broadcasts its RF signal.
409