14: Poor Fusing
Is the paper OKI DATA
specified grade?
(Tension: 2.5 kg)
Is there proper contact between
the fuser unit and the contact
Check the thermister, the heater
(inside the fuser unit),
R44 board and Power Supply Unit.
Troubleshooting
Poor fusing
No
Yes
Is the (Bias)
No
spring normal?
Yes
No
assembly?
Yes
7 - 48
Use paper of OKI DATA
specified grade.
Replace the pressure roller spring.
Adjust for proper contact between
the fuser unit and the
contact assembly.
Service Manual, P/N 59276801
OKIOFFICE 44