One-Touch Key Program Settings [Table 2.9.4] (3/4) - Oki OKIOFFICE44 Service Manual

One-Touch Key Program Settings [Table 2.9.4] (3/4)

F+OT
Item
No.
9 User's programs
1. Function program
2. Dial parameters
3. Clock adjustment
(continued on next page)
Installation Procedure
Specifications
Function program
01: MCF (SINGLE-LOC.)
02: MCF (MULTI-LOC.)
03: ERR. REPORT (MCF.)
04: IMAGE IN MCF.
05: SENDER ID
06: MONITOR VOLUME
07: BUZZER VOLUME
08: CLOSED NETWORK
09: TX MODE DEFAULT
10: T/F TIMER PRG.
11: RING RESPONSE
12: DISTINCTIVE RING
13: 1'ST PAPER SIZE
14: 2'ND PAPER SIZE
15: USER LANGUAGE
16: INCOMING RING
17: REMOTE RECEIVE
18: MEM./FEEDER SW
19: Not Used
20: ECM FUNCTION
21: REMOTE DIAGNOSIS
22: PC/FAX SWITCH
23: ONE TOUCH PARAM.
For Function Programs 01 through 23, refer to Table 2.9.4.
Dial parameters
1. REDIAL TRIES
2. REDIAL INTERVAL
3. DIAL TONE DETECT
4. BUSY TONE DETECT
5. MF (TONE)/DP (PULSE)
6. PULSE DIAL RATE
7. PULSE MAKE RATIO
8. PULSE DIAL TYPE
9. MF(TONE) DURATION
10. PBX LINE
11. FLASH/EARTH/NORMAL
12. AUTO START
13. DIAL PREFIX
14. Not Used
Refer to Table 2.9.6 for specification of dial parameter settings.
Date and time adjustment.
2 - 44 OKIOFFICE 44
Service Manual, P/N 59276801