Memory Board Installation - Oki OKIOFFICE44 Service Manual

Memory Board Installation

• In the OKIOFFICE 44, the MEM memory board is mounted on to the connector CN13 of R44
board.
Installation
Remove Cover-rear
Remove the Cover-rear by
removing the screw 1.
Fixing hook
Remove PC Interface (CTR PCB),
Cover-Rear
if installed.
Screw 1
Fig. C.1.1
Install Memory Board:
First, install the memory board on
to the connector CN13 of R44
board, and then tighten the two
screws to the separation plate.
Then, re-install the CTR PCB
Board-Memory
(if used).
Screw 1
Fig. C.1.2
Installation Procedure 2 - 69 OKIOFFICE 44 Service Manual, P/N 59276801