Feature Specifications Table 2.9.3 (1/3); User's Functions - Oki OKIOFFICE44 Service Manual

User's Functions

Feature Specifications Table 2.9.3 (1/3)

No. Item
1 Auto dial
1) One-touch dial
2) Two-digit dial
3) Keypad dial
4) Chain dial
5) Mixed dial
2 Manual dial
3 Receive mode
1) Auto receive mode
2) Manual receive mode
3) Telephone/fax automatic
switchover
Installation Procedure
Specifications
10 one-touch keys are provided.
Maximum. 32 digits for each location number.
In addition to an ordinary location number, another alternate
location number can be registered in to each one-touch key.
Purposes of this alternate location number:
1) Fax dial
A fax number is registered as an alternate location number.
When a call to the first location number is not answered, the
alternate location number will be automatically dialled.
45 different codes are provided.
Two- digit location code:
Maximum. 32 digits for each location number.
With ten-key pad.
Maximum. 40 digits for one operation
The number of dialling digits can be expanded by chaining any
number of the types listed above (Auto Dial Items 1, 2 and 3).
Type of dialling can be changed from pulse dial to tone dial halfway
in dialling process.
The changing point is specified by using the * key.
With the (optional) telephone handset.
Selectable by key operation.
Selectable by key operation.
Selectable by key operation.
The fax recognizes a fax call from a verbal call as follows:
If the fax detects a call with a CNG signal, it starts an automatic
document receive operation.
If it detects a call without a CNG signal, it sounds the buzzer to
indicate a voice call. Operator can answer the call by lifting the
telephone handset.
If he or she does not lift the handset within predetermined time (20
sec. or 35 sec.), the fax automatically starts a document receive
operation.
* FP + 10 (To determine the timer.)
Note: Refer to TEL/FAX Mode Flow Chart
2 - 38
01 to 45
OKIOFFICE 44
Service Manual, P/N 59276801