Table of Contents
Advertisement
4.3.1 Confirmation
Select a drive with the [Space] key.
Since it is assumed that data is stored on a floppy disk, you can select drive A or drive B.
When setup is ready, insert a formatted floppy into the drive and press the [Enter] key, then saving is initi-
ated.
• Press [Esc] to terminate saving message and return to the main menu screen.
4.4
Loading Message
Model Selection:
Select "MESSAGE LOAD" on the menu screen, the following screen is displayed.
Enter the key number indicated on the left side of the model with a message reset.
• Press [Page Up] or [Page Down] to scroll the screen back to the previous page or up to the next page.
• Press [Esc] to terminate the FAX model selection and return to the menu screen.
RMCS System
< REMOTE MANAGEMENT CENTER SYSTEM >
<< MESSAGE MODIFYING TOOL>>
<< MESSAGE SAVE >>
SOURCE :
RMCS SYSTEM
DESTINATION : A(FD)
PLEASE INSERT A FORMATED DISK,
THEN PRESS THE ENTER KEY TO SAVE.
(PRESS THE ESC KEY TO CANCEL)
<REMOTE MANAGEMENT CENTER SYSTEM>
<< MESSAGE MODIFYING TOOL>>
<< MESSAGE LOAD>>
[S]
: RMCS SYSTEM
[0]
: FAX MODEL0
[1]
: FAX MODEL1
[2]
: FAX MODEL2
[3]
: FAX MODEL3
[4]
: FAX MODEL4
[5]
: FAX MODEL5
[6]
: FAX MODEL6
[7]
: FAX MODEL7
[8]
: FAX MODEL8
[9]
: FAX MODEL9
[PAGE UP]
: PREVIOUS PAGE
[PAGE DOWN] : NEXT PAGE
PLEASE SELECT THE FAX MODEL
(PRESS THE ESC KEY TO CANCEL)
G - 18
1/1
Service Manual, P/N 59276801
OKIOFFICE 44
Advertisement
Table of Contents
Troubleshooting
