One-Touch Key Program Settings [Table 2.9.4] (4/4) - Oki OKIOFFICE44 Service Manual

One-Touch Key Program Settings [Table 2.9.4] (4/4)

F+OT
Item
No.
9 (continued from previous page)
4. System data program
5. Not Used
6. Not Used
10 Print operation
1. Substitutive message print
2. Not Used
3. Printer cleaning
Installation Procedure
Specifications
(1) TSI/CSI
Registration of TSI/CSI/CIG (numbers, + and space) in 20
digits.
TSI:Transmitting Subscriber Identification
CSI: Called Subscriber Identification
CIG: Calling Subscriber Identification
(2) SENDER ID
Registration of sender ID (alphabetic, numeric and symbolic)
in 32 digits.
(3) CALL BACK NO.
Registration of telephone number for cover letter (alphabetic,
numeric and symbolic) in 20 digits.
Used to print messages stored in memory during toner low condi-
tion..
Also used to print messages received in memory when RX Mode
is set to MEM RX.
The messages are printed when toner has been newly supplied or
an operator performs the substitutive operation.
When memory reception data exists in the memory and the
MEMORY RX MODE is indicated by AUTO REC key operation
for OKIOFFICE 44 machine will print out the memory reception
data.
When print quality becomes questionable, this drum cleaning
function removes the residual toner on the image drum. The
residual toner is removed by printing.
This operation should be performed before any hardware replace-
ments are considered.
2 - 45 OKIOFFICE 44
Service Manual, P/N 59276801