Ring Response Time - Oki OKIOFFICE44 Service Manual

Ring Response Time

Before specifying the ring response time, set the service bit on following the operations shown in
2.9.3 (1). (Service Bit Setting).
Operations:
To begin, press SELECT FUNCTION
key once and one-touch key No. 9 in
the standby mode (when no
message is in memory).
Press key enter using the
ten-key pad.
Enter 11 using the ten-key pad.
Press key until the setting
you want is displayed, then press
key.
Installation Procedure
The display shows:
SELECT FUNCTION (OT)
MEMORY AVAIL.=100%
Press OT9
1:FUNC. PROGRAMMING
YES( ) NO( /1-4)
or 1
FUNCTION NO. [
ENTER 01-23
11 entered.
11:RING RESPONSE
[ X ]YES( ) NO( )
(Each ring response time of 5,10,15 or 20
sec. is given by pressing
2 - 54 OKIOFFICE 44 Service Manual, P/N 59276801
]
Setting
X:
1RING 05SEC 10SEC
20SEC 15SEC
key.)