Feature Specifications Table 2.9.3 (3/3) - Oki OKIOFFICE44 Service Manual

Feature Specifications Table 2.9.3 (3/3)

No. Item
12 Broadcast
(Memory transmission)
13 Delayed transmission from the
memory
14 Polling transmission
(To be polled)
15 Polling reception
16 Transmission preparation (Hopper)
17 No toner reception
18 Smooth printing
19 Not Used
Installation Procedure
Specifications
A maximum of 56 remote locations can be specified by the
following means:
• One-touch keys (with of without a group list).
• Two-digit auto dial codes.
• 1 keypad dial number
One delayed time of calling for this feature can be specified unless
any other delayed calling feature has been specified.
One delayed broadcast and one immediate calling of broadcast is
possible with the OKIOFFICE 44.
When multiple locations are specified for one broadcast
(1) The OKIOFFICE 44 prints a broadcast entry report, if speci-
fied in operating sequence.
(2) The OKIOFFICE 44 can print a broadcast confirmation report.
(FP + 02 To enable or disable this printout)
The fax can automatically transmit documents at one specified time
for OKIOFFICE 44
Document(s) placed on the feeder can be collected by a remote
station.
The fax can collect documents from one remote station.
An operator can prepare documents for transmission even while the
fax is engaged in message reception. They will be automatically
transmitted upon completion of the reception.
An operator can also prepare documents for transmission during
transmission from memory.
The fax can temporarily store received messages in memory when
toner has run out. The messages are printed when toner has been
newly supplied or an operator presses the SELECT FUNCTION
key followed by the one-touch key No. 10 under the LCD message
"MSG. IN MEMORY/REPLACE TONER CART." in the standby
mode.
* TF + 06 (To enable or disable this function)
The documents received in the STD mode can be printed at the
FINE resolution by means of generating one line based on the two
consecutive original lines and printing it between them.
2 - 40 OKIOFFICE 44
Service Manual, P/N 59276801