Service Personnel Initial Settings Table 2.9.1 (7/7) - Oki OKIOFFICE44 Service Manual

Service Personnel Initial Settings Table 2.9.1 (7/7)

T.F.
Item
No.
28 Head width
29 Media type
This setting can cause minor changes
in the transfer roller current to com-
pensate for different paper weights.
30 Transfer Roller Latch Current
This setting can cause minor changes
in the transfer roller current to com-
pensate for different paper weights.
31 Not Used
Installation Procedure
Specifications
Head width (later)
You should confirm the head width by the following
table, and then select it by this setting.
(Refer to 4.2.1)
Head width is two types (TYPE1/TYPE2).
Setting Head width
TYPE 1 208 mm
TYPE 2 216 mm
Selects the recording paper according to its quality.
Medium, Medium-heavy and Heavy selectable.
Selects the latch current for the transfer roller
( -1, 0, +1, +2)
2 - 25
Default
TYPE 2
Head label
1115G2
A4 200
Medium
OKIOFFICE 44
Service Manual, P/N 59276801
+ 1