8: Smeared Background on Output
The blank background is smeared.
Is the contact of the cleaning roller
with the contact assembly properly?
Troubleshooting
Yes
Has the Image Drum been
exposed to external light?
No
Yes
Is the heat roller of the
fuser unit dirty?
No
of the EP unit in contact
No
Replace the EP unit or
PWU-HV Board
R44 Board
7 - 42
Close and wait for about
30 minutes.
Clean it.
Yes
Adjust the contact of the
cleaning roller to contact
the contact assembly properly.
Service Manual, P/N 59276801
OKIOFFICE 44