User Function Program Settings Table 2.9.4 (1/4); Function Program - Oki OKIOFFICE44 Service Manual

Function Program

User Function Program Settings Table 2.9.4 (1/4)

P.F.
Item
No.
01 Message confirmation report
(Single location)
02 Message confirmation report
(Multiple locations)
03 Error report (MCF)
04 Image in MCF
05 Sender ID
06 Line monitor volume
07 Buzzer volume
Installation Procedure
Specifications
Enables or disables the automatic message confirma-
tion report printing after a single location call.
ON: Printing the MCF report.
OFF: Disables this function.
Enables or disables the automatic message confirma-
tion report printing after a multiple polling or broad-
cast.
ON: Prints the MCF report.
OFF: Disables this function.
Enables or disables the automatic error report print-
ing when transmission error occurs.
(Excepts for service bit "0".)
ON: Printing the error report.
OFF: Disables this function.
Enables or disables the automatic printing of the
image on the first sheet below the message confirma-
tion report.
ON: Printing the image in MCF report.
(Memory transmission only)
OFF: Disables this function.
The fax can transmit programmed alphanumeric
message, such as company's name consisting of up to
32 characters.
Enables or disables the sender ID function.
* (Outside only)
ON: Enables
OFF: Disables
Controls the volume.
Settings:
OFF Low High
Selects the sound volume of each buzzer (end of
communication buzzer, voice request buzzer and off-
hook alarm) and software ringer from high, low and
middle levels.
Settings:
Low Mid High.
Note: Fixed a low level for key touch tone.
2 - 46
Default
OFF
ON
ON
ON
ON
LOW
MID
OKIOFFICE 44
Service Manual, P/N 59276801