Tad Mode Flow Chart (Type 1) - Oki OKIOFFICE44 Service Manual

TAD Mode Flow Chart (Type 1)

Even though the fax does not detect CNG signal, the fax will go to receiving mode.
*1 To enable the manual TX mode.
Load document
NOTE:
If the Remote RX function is set to a value other than OFF, that code can be used to force FAX RX
during TAD Mode Operation.
Telephone call
or manual
transmission
*1
Installation Procedure
Press START button Manual transmission
Calling Called
party party
Ringing
Message from answer machine
To record your message in
answering machine
CED
NSF, CSI, DIS
DCN
2 - 28
Indication of LCD
14:14 [TAD]
(TAD)
CML ON
2.1S
TELEPHONE BUSY
Answering
Machine
Switches to
FAX
AUTO REC. START
CML "OFF"
FX050VP-C2-019
Service Manual, P/N 59276801
CNG
Detection
Period
OKIOFFICE 44