7.1.7
Transmission Problem
This section explains how to localize the cause of problems occurred after completion of connection with a
remote station.
Step 1:
Set MH ONLY (Technical function
No. 13) to ON.
Step 2:
Set HIGH-SPEED MODEM RATE
(Technical function No. 14) to 4800 bps.
Step 3:
Adjust send signal power level.
(Technical function No. 22)
Step 4:
Set ECHO PROTECTION (Technical
function No. 12) to ON.
Troubleshooting
Document feeds, but no document is received at remote station.
Start
Yes
Solved?
Yes
Solved?
No
Yes
Solved?
No
Yes
Solved?
No
A
7 - 10
Return to section 7.1.1
OKIOFFICE 44
Service Manual, P/N 59276801