Message Modifying Tool; Activating The Program; Modifying Message; File Selection - Oki OKIOFFICE44 Service Manual

4.

Message Modifying Tool

4.1

Activating the Program

After activating the PC/AT with a hard disk, insert the RMCS system disk into drive A.
When C>_ is displayed, enter the following commands to activate the program.
C>A:[Enter]
A> SCRNED [Enter]
Then the screen for menu selection is displayed.
• Press [0] - [2] to display a screen for FAX model selection of each service.
• Press [Q] to terminate the program and return to PC-DOS.
4.2

Modifying Message

File selection:

Select "MESSAGE" MODIFY" on the menu screen, then the following screen is displayed.
Enter the key No. indicated on the left of the model to modify. Then the screen for file selection is displayed.
• Press [Page Up] or [Page Down] to scroll the screen back to the previous page or up to the next page.
• Press [Esc] to terminate the FAX model selection and return to the menu screen.
RMCS System
< REMOTE MANAGEMENT CENTER SYSTEM >
<< MESSAGE MODIFYING TOOL>>
(MENU)
[0] : MESSAGE MODIFY
[1] : MESSAGE SAVE
[2] : MESSAGE LOAD
[Q] : TERMINATE
PLEASE SELECT THE DESIRED ITEM.
<REMOTE MANAGEMENT CENTER SYSTEM>
<< MESSAGE MODIFYING TOOL>>
<< MESSAGE MODIFY>>
[S] : RMCS SYSTEM
[0] : FAX MODEL0
[1] : FAX MODEL1
[2] : FAX MODEL2
[3] : FAX MODEL3
[4] : FAX MODEL4
[5] : FAX MODEL5
[6] : FAX MODEL6
[7] : FAX MODEL7
[8] : FAX MODEL8
[9] : FAX MODEL9
[PAGE UP] : PREVIOUS PAGE
[PAGE DOWN] : NEXT PAGE
PLEASE SELECT THE FAX MODEL
(PRESS THE ESC KEY TO CANCEL)
G - 16
1/1
Service Manual, P/N 59276801
OKIOFFICE 44