Registering The Rmcs Basic System - Oki OKIOFFICE44 Service Manual

2.2.1 Registering the RMCS Basic System

The flow of new registration is different from that of updating. First, the flow of new registration is described
below.
1) Enter the drive No. used to register the system.
RMCS System
Remote Management Center System
<< RMCS SETTING >>
HARD DISK DRIVE = [C]
Press the Esc key to cancel.
Remote Management Center System
<< RMCS SETTING >>
HARD DISK DRIVE = [C]
DIRECTORY = [C:\RMCS_
Press the Esc key to cancel.
G - 5
]
OKIOFFICE 44
Service Manual, P/N 59276801