High-Speed Modem Send Test - Oki OKIOFFICE44 Service Manual

6.9

High-speed Modem Send Test

NOTE:
This procedure requires coordination with technical staff at the remote location.
In addition, both locations must have a telephone handset connected to each machine.
1. Purpose
To check the telephone line quality in combination with a remote station programmed to the high-
speed modem receive test mode.
2. Procedure
Operations:
To begin, press SELECT FUNCTION key once,
COPY key twice and
message in memory)
Enter "5".
Press key.
Set MODEM rate by
Press key.
All zero data will be continuously sent.
After the test, press STOP key.
33.6K (OKIFAX 5500/5600)
*1:
33.6K and 28.8K are skipped for the MODEM without 33.6/28.8K bps function.
Cleaning and Maintenance
key twice. (with no
key.
28.8K (OKIFAX 5500/5600)
0.3K 2.4K 4.8K
6 - 16
The display shows:
1:SELF DIAGNOSIS
YES( ) NO( /1-8)
5
5:MODEM SEND TEST
YES( ) NO( /1-8)
MODEM RATE
[14.4K] YES( ) NO( )
5:MODEM SEND TEST
TX/14.4K/00'00"
(For detail, see Fig. 6.9.1)
14.4K 12.0K
7.2K (V.29) 9.6K (V.29)
OKIOFFICE 44 Serv Man, P/N 59276801
*1
Key
9.6KT (V.17)
7.2KT (V.17)