7
Poor fusing
• Is the specified paper being used?
• No
• Yes
Is the bias spring normal? (Tension: 3.25 kg)
• No
• Yes
Are the heater connector of the heat assy and the CN1 connector of the power supply
unit connected correctly.
• No
• Yes
Replace the heat assy.
• Has this error been recovered?
• Yes
• No
Replace the main control board or high-voltage power supply board.
Use the specified paper. (xerox 4200 (20 lbs))
Replace the bias spring.
Connect the connectors correctly.
End
6 - 18