Main Menu; Environment Setting - Oki OKIOFFICE44 Service Manual

3.3

Main Menu

The main menu screen varies according to FAX models. For further operation, refer to each FAX model
manual.
There are two ways to specify an item: select by using the [ ] and [ ] keys, then press [Enter] or enter the
number before each item.
Detail on "Environment Setting" is described later.
Submenus can also be specified by using the function keys.
Press [F1] to return to TEL directory menu screen.
Press [F2] to display the TEL number setting screen when you want to change the number registered into the
user information file temporarily.
3.4

Environment Setting

Selecting "ENVIRONMENT SETTING" on the main menu to display this screen.
Communication port setting:
Select communication port to connect the IBM PC/AT and PC-I/F.
Frame size setting:
Select a frame size for each frame to transfer TEL number data and program/language/default data during
execution of File [LOAD] (Center to FAX) and [EDIT] (ON LINE).
Operation report:
The operation report displays the transmission status.
Press [F1] to return to the main menu screen.
RMCS System
User ID
F1 : TEL directory
FAX model [
F2 : Set the TEL number
TEL number [
<< MAIN MENU >>
1: Initialization of FAX
2: File [LOAD] (Center to FAX)
3: File [SAVE] (Center from FAX)
4: [EDIT] (ON LINE)
5: File [EDIT] (OFF LINE)
6: Testing
7: Environment setting
8: Terminate
Please select the desired item.
12/10/1996 18:58 Operator ID [
User ID
F1 : Return to the main menu
FAX model [
TEL number [
<< ENVIRONMENT SETTING >>
1 : Communication port setting
2 : Frame size setting
3 : Operation report
Please select the desired item.
12/10/1996 09:26 Operator ID [
G - 15
[ ]
]
]
] scrn xxxx
[ ]
]
]
] scrn xxxx
Service Manual, P/N 59276801
OKIOFFICE 44