User Function Program Settings Table 2.9.4 (3/4) - Oki OKIOFFICE44 Service Manual

User Function Program Settings Table 2.9.4 (3/4)

P.F.
Item
No.
14 Not Used
15 User language
16 Incoming ring
17 Remote receive
This function also used for
TAD Mode.
18 Memory and feeder switch
19 Not Used
20 ECM function
21 Remote diagnosis
Installation Procedure
Specifications
A choice of 2 languages for LCD and print message are
available.
ENG (English) and Spanish/French/Portuguese
Instead of ringer circuit, software can control built-in
speaker to ring sound.
To enable (ON) or disable (OFF) or distinctive ring
(DRC) a software generated ring sound to indicate
arrival of an incoming bell.
This function is used to transfer the call received by
external telephone (connected to fax) by entering preset
two-digits.
The following combinations are selectable.
00/11/22/33/44/55/66/77/88/99/**/##/OFF selectable.
Switches the transmission mode between the memory
and feeder.
MEM. TX/FEEDER TX selectable.
Note: Memory or feeder setting can register as the
default by operating the "F + OT 2".
Enables or disables ECM (error correction mode) com-
munication.
ON: Enables
OFF: Disables
Enables or disables the remote diagnosis function when
the machine can allow remote diagnosis from remote
center.
ON: Enables
OFF: Disables
2 - 48
Default
ENG
ON
OFF
FEEDER
TX
ON
OKIOFFICE 44
Service Manual, P/N 59276801