7: Light Or Blurred Output - Oki OKIOFFICE44 Service Manual

7: Light or Blurred Output

Images are light or blurred as a whole.
Troubleshooting
Is toner low?
No
Does the paper meet
OKI DATA specifications?
Yes
Are there fingerprints
or smudges / dirt
on the paper?
No
Is the lens surface of the
LED print head dirty?
No
Is the LED print head
installed properly?
Yes
Does the contact plate of the transfer
roller make proper contact with the
Power Supply Board?
Yes
Replace the transfer roller,
EP unit or Power Supply Unit.
7 - 41
Yes
Supply toner.
No
Use paper that meets
specifications.
Yes
Replace the paper.
Yes
Clean the lens.
No
Properly install the LED
print head.
Make good contact.
No
Service Manual, P/N 59276801
OKIOFFICE 44