2.9.3
Technical Functions Example
(1)
Service Bit Setting
1)
Purpose
To enable or disable the following functions:
•
Drum and toner counter display (clear)
•
Service default report printing
•
Protocol dump report printing
•
Ring response time setting
•
Dial parameters setting
•
Printer counters clearing
2)
Procedure
To bring the LCD up to the desired message
press SELECT FUNCTION key once, COPY
key twice and "2"key. (In case of no message
in memory)
Press
Service bit setting is T.F. No. 01.
Enter "01"
*1: 01-30 for OKIOFFICE44
Reference: See Figure 2.9.1 on the next page for the general operation flow.
Installation Procedure
Operations:
key.
2 - 30
The display shows:
2:TECHNICAL FUNCTION
YES( )
NO( /1-4)
FUNCTION NO. [
ENTER 01-30
"01"
01:SERVICE BIT ?
[ X ] YES( ) NO( )
Setting (Toggle)
X: OFF
ON
To 02: MONITOR CONT.
Service Manual, P/N 59276801
]
*1
OKIOFFICE 44